🔹 Part 1: Earthwork
- Scope: Measurement of excavation, filling, banking, cutting in soils/rocks.
- Units:
- m³ → excavation, filling.
- m → depth classification.
- Classification: Ordinary soil, hard soil, soft rock, hard rock, blasting.
- Notes: Lead, lift, dewatering, shoring measured separately.
🔹 Part 2: Concrete Works
- Scope: Plain concrete in foundations, floors, mass concrete.
- Units: m³ for concrete; m² for thin flooring.
- Classification: Lean concrete, foundation concrete, flooring, grading.
- Notes: Formwork, reinforcement excluded (measured separately).
🔹 Part 3: Brickwork
- Scope: All brick masonry.
- Units: m³ for brickwork; m² for half-brick walls.
- Classification: By class of brickwork, thickness, location (superstructure, foundation).
- Notes: Deductions for openings >0.1 m²; small chases ignored.
🔹 Part 4: Stone Masonry
- Scope: Random rubble, coursed rubble, ashlar masonry.
- Units: m³ for walling; m² for facing.
- Classification: By type (random rubble, coursed rubble, ashlar), by thickness.
- Notes: Joints included, fixtures not measured separately.
🔹 Part 5: Formwork
- Scope: Shuttering/centering for concrete.
- Units: m² of contact area.
- Classification: By surface (foundation, beams, columns, slabs, curved work).
- Notes: Strutting, propping included in rates.
🔹 Part 6: Re-pointing and Plastering
- Scope: Measurement of plastering and pointing on surfaces.
- Units: m².
- Classification: Thickness (6, 12, 20 mm), single/double coat, sand-faced, rough cast.
- Notes: Openings <0.5 m² ignored; bands/beads measured separately.
🔹 Part 7: Woodwork and Joinery
- Scope: Carpentry, joinery – doors, windows, shutters, furniture.
- Units: m³ (frames), m² (shutters, panelling), RM (mouldings), No. (furniture).
- Classification: By timber type (hardwood/softwood) & item category.
- Notes: Fixtures included; finished sizes measured.
🔹 Part 8: Steelwork and Ironwork
- Scope: Structural steel & fabricated ironwork.
- Units: tonne (t) or kg for steel; m² for sheet work; m for bars.
- Classification: Trusses, joists, purlins, frames, gratings, railings.
- Notes: Welding, bolts, rivets included.
🔹 Part 9: Roof Coverings
- Scope: Roofing sheets, tiles, corrugated sheets.
- Units: m².
- Classification: By material (AC sheets, GI sheets, tiles, shingles).
- Notes: Overlaps allowed, fixtures included.
🔹 Part 10: Ceiling and Linings
- Scope: Suspended ceilings, false ceilings, linings.
- Units: m².
- Classification: Plasterboard, fibreboard, GI, wood, PVC.
- Notes: Openings <0.4 m² ignored.
🔹 Part 11: Flooring, Dado, Skirting
- Scope: Measurement of all types of flooring and wall finishes.
- Units: m².
- Classification: Stone, marble, terrazzo, tiles, vinyl, mosaic.
- Notes: Insets and borders included in overall area.
🔹 Part 12: Painting, Whitewashing, Distempering
- Scope: Surface finishes like paint, distemper, polishing.
- Units: m².
- Classification: Whitewash, colour wash, distemper, enamel, emulsion, French polish.
- Notes: Coats stated separately; new work vs maintenance.
🔹 Part 13: Water Supply, Sanitary & Plumbing
- Scope: Internal & external water supply, sanitary fittings, drainage.
- Units:
- RM → pipes.
- No. → fittings (taps, valves, fixtures).
- Classification: By pipe material (GI, CI, PVC) & size.
- Notes: Cutting, chasing, jointing included.
🔹 Part 14: Gas Supply and Distribution
- Scope: Gas supply pipelines, fittings, appliances.
- Units: RM for pipes, No. for fittings.
- Classification: By pipe diameter & material.
- Notes: Similar to plumbing; appliances measured separately.
🔹 Part 15: General Building Works – Fixtures
- Scope: Fixtures like shelves, racks, cupboards, partitions.
- Units: No. or m².
- Classification: By type & material.
- Notes: Hardware fittings included in rate.
🔹 Part 16: Lath and Plaster
- Scope: Lath base (wood/metal) with plaster finish.
- Units: m².
- Classification: By plaster type and thickness.
- Notes: Nails, supports included.
🔹 Part 17: Road Work – Earthwork & Subgrade
- Scope: Earthwork in roads, embankments, subgrade prep.
- Units: m³.
- Classification: Soil, gravel, rock.
- Notes: Compaction included.
🔹 Part 18: Road Work – Bases & Surfaces
- Scope: Soling, WBM, bituminous, concrete roads.
- Units: m³ (soling), m² (surface).
- Classification: WBM, WMM, asphalt, concrete pavement.
- Notes: Seal coat, tack coat measured separately.
🔹 Part 19: Dismantling & Demolition
- Scope: Demolition of masonry, RCC, steel, woodwork.
- Units: m³ (mass work), m² (floor/wall finishes), No. (fixtures).
- Classification: By type of material.
- Notes: Serviceable material credit not deducted from measurement.
🔹 Part 20: Waterproofing & Damp-proofing
- Scope: Treatment against water penetration.
- Units: m².
- Classification: Bitumen, cement slurry, membranes, integral compounds.
- Notes: Joints, overlaps included.
🔹 Part 21: Woodwork and Joinery
(same as Part 7 but more detailed for joinery)
- Scope: Detailed joinery items – shutters, flooring, partitions.
- Units: m³, m², RM, No.
- Classification: By timber type and item.
- Notes: Fixtures included, finished size measured.
🔹 Part 22: Steel Reinforcement
- Scope: RCC & prestressed steel measurement.
- Units: kg or tonne.
- Classification: Mild steel, HYSD, TMT, strands.
- Notes: Length before bending; laps/hooks as per codes.
🔹 Part 23: Piling
- Scope: Driven, bored, under-reamed piles & pile caps.
- Units: RM (piles), No. (bulbs), m³ (caps).
- Classification: By pile type, size, material.
- Notes: Length from cut-off to founding level.
🔹 Part 24: Well Foundations
- Scope: Well/caisson foundations for bridges.
- Units: m³ (excavation, concreting), RM (sinking), No. (curbs).
- Classification: Steining, curbs, plugs, filling, caps.
- Notes: Depth from platform to founding level; temporary works not measured.
